HACKED!: Looping Louie on steroids


Previous video:
More project info on Instructables (parts list, schematic, arduino code):
Buy your Looping Louie game here (affiliate links):

Parts list (affiliate links):
1x LCD 16×2 HD44780:
2x Push button:
1x 10k Potentiometer:
1x DC Jack:
1x 9V Power Supply (1A):
1x Slide Switch:
1x PCB (copper dots):
1x LM7805:
2x 10µFCapacitor:
2x 100nF Capacitor:
2x 22pF Capacitor:
1x 100k Potentiometer:
3x 10k Resistor:
1x 16MHz Crystal:
1x Atmega 328P:
1x FTDI breakout:
1x L293D:

In this HACKED! episode I will show you how a normal “Looping Louie” kids game received a big speed boost by using a standalone Arduino and a motor driver.

2011 Lookalike by Bartlebeats
Ecstatic Wave by Jens Kiilstofte
Aduro by Jens Kiilstofte

Nguồn: https://tinquangbinh.net/

Xem thêm bài viết khác: https://tinquangbinh.net/game/


  1. I built the circuit the same way, but the buttons on pin 16 and 17 only work when the other side is connected to GND and not to 5v. Does anyone have an explanation?

  2. Thanks a lot for your outstanding videos with very high quality audio, photography, clarity, technology etc. I am amazed at the mind boggling effort that must have gone in making such superb quality technical videos. I shall be greatly obliged if you could indicate the software used. Though I had subscribed your channel long time back I have now realized how much I missed. Now onwards I will watch all your 200 plus videos. I will remain a great fan of yours for ever.

  3. Inspiriert von diesem Video habe ich diese Variante gebaut: https://www.youtube.com/watch?v=xB6Ei8BltFU 🙂 Wer Bock hat einfach mal reinschauen !! 🙂 Habe das ganze um WS2812B-LEDs, einen Akku, ein gedrucktes Gehäuse, ein Interface und Buttons erweitert 🙂 zusammen mit einem Sub-D-Stecker ist das ganze ziemlich portabel 🙂

  4. Ich dachte mir direkt von Anfang das du das nicht aus Spaß mit deinen Freunden spielst, sondern als Trinkspiel benutzt! 🙂 hat auf jeden fall Stil!

  5. Lass mich raten das es war PE-HD wenn ja benutze ihn nicht ist ein scheisse Kunststoff für sowas. Trotzdem Geiles Video mach weiter so🤙

  6. Hey scott, würdest du mir die box zusammen bauen und mir schicken? Würde dir natürlich auch was dafür bezahlen! Wäre das möglich?


  7. Was this something you did for university? You say your friend made the code and you wanted it to look really good. Was this for an exam? 😃

  8. @GreatScott! You are using a saw to cut female headers. 😀
    You should just snap them off using just a cutting plier. 🙂

  9. I never use a saw on perfboard (FR-2), i just break it over the corner of the table… 😉

    To make sure that it breaks where intended, you can make a shallow cut along the break-line. Just scratch the surface, thats enough. This is not only much faster, it also produces much less dust.

  10. You should invest in a vise and some clamps. It makes cutting things much easier and safer for your fingers.


Please enter your comment!
Please enter your name here